Guides

Chemical Oxygen Demand Formula Explained: Derivation, Worked Examples & Common Mistakes

Master the Chemical Oxygen Demand formula with a full derivation, worked laboratory examples, a reference table and the common pitfalls to avoid.

Miryori Editorial Team2 min read
Try the Chemical Oxygen Demand (COD) Calculator

Chemical Oxygen Demand is governed by a precise chemical equation that comes up again and again. This guide explains the method, provides a ready-to-use reference table, walks through worked examples and flags the mistakes students and practitioners most often make.

How It Works

The underlying relationship connects measurable quantities to the value you need. Substitute your own values for Chemical Oxygen Demand, keep units consistent and convert to SI bases before applying the equation. Check that the result is chemically sensible — negative masses, mole fractions above one or yields above 100% signal a mistake.

The Exact Formula

This is the actual equation the calculator evaluates:

COD=(Vb−Vs)×MFAS×8000Vsample=(25−18.2)×0.1×800020=272 mg/L\text{COD} = \frac{(V_b - V_s) \times M_{\text{FAS}} \times 8000}{V_{\text{sample}}} = \frac{(25 - 18.2) \times 0.1 \times 8000}{20} = 272\text{ mg/L}

Step-by-Step Calculation

  1. Standard dichromate reflux titrimetric method.
  2. Titrant volume difference ΔV = 6.8 mL.
  3. Chemical Oxygen Demand COD = 272 mg/L.
  4. Surface water classification: Grade V Severely Polluted.

With the calculator’s default inputs, the result is:

  • Cod Mg L: 272 mg/L
  • Pollution Class: Grade V Severely Polluted
  • Bod Est Ratio: 122.4 mg/L
  • Oxygen Demand Total: 6.8 mL

Quick Reference Table

The table below gives typical values and how to interpret them. Actual numbers depend on the specific substances and conditions.

Quantity Symbol Typical unit
Amount of substance n mol
Mass m g
Molar mass M g/mol
Concentration c mol/L

Frequently Asked Questions

What is Chemical Oxygen Demand used for in practice?

It is used whenever a quantity must be predicted or interpreted from measurements — in the lab, in process chemistry, in environmental testing and in quality control.

What is the most common mistake?

Mixing units, forgetting to convert to SI bases, or rounding intermediate results too early. Write units beside every number and convert before substituting.

Do I always need standard conditions?

Many equations assume a stated temperature and pressure. Always note the reference conditions, because equilibrium constants, volumes and rates are temperature-dependent.

How do I know if my answer is reasonable?

Check dimensional consistency and physical bounds: mole fractions lie between 0 and 1, percent yields below 100% for a single step, and concentrations cannot be negative.

References

  • IUPAC Compendium of Chemical Terminology (Gold Book).
  • NIST Chemistry WebBook and Standard Reference Data.
  • CRC Handbook of Chemistry and Physics.
Calculator

Chemical Oxygen Demand (COD) Calculator

Calculate Chemical Oxygen Demand (COD) Calculator instantly with high-precision formulas, interactive molar distributions, and step-by-step chemical principles. Fast, free, and private.

Try the Chemical Oxygen Demand (COD) Calculator